MWO Omega

DOWNLOAD THIS MODEL  HERE  

 

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

• Layer height: 0.1mm*
• Initial layer thickness: 0.3mm
• Bottom/top pattern: lines
• Skin perimeter line count: 0
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

DOWNLOAD THIS MODEL  HERE